d a t a sh eet supersedes data of september 2004 2008 sep 01 ferroxcube p9/5 p cores and accessories
2008 sep 01 928 ferroxcube p cores and accessories p9/5 core sets effective core parameters symbol parameter value unit (i/a) core factor (c1) 1.24 mm ? 1 v e effective volume 126 mm 3 i e effective length 12.5 mm a e effective area 10.1 mm 2 a min minimum area 7.9 mm 2 m mass of set 0.8 g mgc211 2.1 0.1 6.5 0.25 3.6 0.55 max 0.3 0 7.5 0.25 0 2.9 m1.4 2 0.2 1.3 0.1 3.9 0 0.2 9.3 0 0.3 5.4 0 0.3 o o fig.1 p9/5 core set. dimensions in mm. core sets for filter applications clamping force for a l measurements, 25 5n. core sets for general purpose transformers and power applications clamping force for a l measurements, 10 5n. grade a l (nh) e total air gap ( m) type number (with nut) type number (without nut) 3d3 40 3% 39 410 p9/5-3d3-e40/n p9/5-3d3-e40 63 3% 62 230 p9/5-3d3-a63/n p9/5-3d3-a63 630 25% 620 0 ? p9/5-3d3 3h3 40 3% 39 430 p9/5-3h3-e40/n p9/5-3h3-e40 63 3% 62 250 p9/5-3h3-a63/n p9/5-3h3-a63 1100 25% 1080 0 ? p9/5-3h3 grade a l (nh) e air gap ( m) type number 3c81 1350 25% 1200 0 p9/5-3c81 3c91 1350 25% 1200 0 p9/5-3c91 3f3 1100 25% 1080 0 p9/5-3f3
2008 sep 01 929 ferroxcube p cores and accessories p9/5 core sets of high permeability grades clamping force for a l measurements, 25 5n. properties of core sets under power conditions note 1. measured at 60 c. grade a l (nh) e air gap ( m) type number 3e27 2300 25% 2020 0 p9/5-3e27 grade b(mt)at coreloss(w)at h=250a/m; f = 25 khz; t = 100 c f = 25 khz; =200mt; t = 100 c f=100khz; =100mt; t=100 c f=100khz; = 200 mt; t = 100 c f = 400 khz; =50mt; t = 100 c 3c81 320 0.035 ??? 3c91 315 ? 0.008 (1) 0.06 (1) ? 3f3 315 ? 0.015 ? 0.03 b ? b ? b ? b ?
2008 sep 01 930 ferroxcube p cores and accessories p9/5 inductance adjusters general data item specification material of head and thread polypropylene (pp), glass fibre reinforced maximum operating temperature 125 c handbook, halfpage mgc212 6.2 2.55 m1.4 2.13 o 0.07 0 1.5 min 0.5 fig.2 p9/5 inductance adjuster. dimensions in mm. inductance adjuster selection chart (applies to all types) note 1. maximum adjustment range. grade a l (nh) types for low adjustment ? l/l (1) types for medium adjustment ? l/l (1) types for high adjustment ? l/l (1) 3d3 40 ?? adj-p9/p11-yellow 11 ?? 63 ??? 18 adj-p9/p11-brown 31
2008 sep 01 931 ferroxcube p cores and accessories p9/5 coil formers general data for coil former cp-p9/5-1s winding data and area product for coil former cp-p9/5-1s parameter specification coil former material polybutyleneterephtalate (pbt), glass reinforced, flame retardant in accordance with ?ul 94v-0? ; ul file number e45329 (r) maximum operating temperature 155 c, ?iec 60085? , class f number of sections winding area (mm 2 ) minimum winding width (mm) average length of turn (mm) area product ae x aw (mm 4 ) type number 1 3.1 2.5 18.9 31.3 cp-p9/5-1s handbook, full pagewidth mgc213 4 0.1 0 3.5 0 0.1 2.7 0.1 0 7.35 0 0.1 1.5 4.78 0 0.1 fig.3 coil former: cp-p9/5-1s. dimensions in mm.
2008 sep 01 932 ferroxcube p cores and accessories p9/5 mounting parts general data item remarks figure type number clamp spring steel, tin plated 4 clm/tp-p9/5 handbook, halfpage mgb606 10 0.25 0.25 4.4 0.5 1.4 0.25 6.15 0.25 9.75 0.25 4 0.25 8 0.25 fig.4 clamp: clm/tp-p9/5. dimensions in mm.
2008 sep 01 933 ferroxcube p cores and accessories p9/5 data sheet status definitions disclaimer life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify ferroxcube for any damages resulting from such application. product status definitions data sheet status product status definitions preliminary specification development this data sheet contains prelimin ary data. ferroxcube reserves the right to make changes at any time without not ice in order to improve design and supply the best possible product. product specification production this data sheet contains final specifications. ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. status indication definition prototype these are products that have been made as development samples for the purposes of technical evaluation only. the data for these types is provisional and is subject to change. design-in these products are recommended for new designs. preferred these products are recommended for use in current designs and are available via our sales channels. support these products are not recommended for new designs and may not be available through all of our sales channels. customers are advised to check for availability.
|
